Wired intercoms

Wired intercoms

#202set

 

202set    2 wire audio

The 202set consists of 

  • C202 call panel in chrome finish
  • Chromed aluminium rainhood
  • S22 handset with door release button
  • N-P18 power supply with DIN rail mounting 

202 sets have a door panel and a handset. Three extra phones can be added. The 200 series is a true 2 wire system, including power for a low energy door strike. 

 

 

 

 

 

 

 

 

 

S-22  phone

The first phone has a two 2 core cable wired into a 4 way terminal. Three slave phones can be added to the installation, wired to the master on a 2 core cable.

Panel Output

The call point can operate a low energy (<10mJ) 12Vdc fail secure door strike from the D/O terminals. Alternatively, there is also a volt free normally open relay contact suitable for driving a door or gate control panel. This set does not include the door strike.

Cable

A single twisted pair cable connects the first handset to the call point. For distances up to 150m, use 0.3mm core cable. Use two cores per terminal for distances up to 300m.

N-P18 power pack

The set includes a power pack that can be fitted out of sight. The two core DC cable should be under 25m long. The power pack requires a 240Vac input.  

#502set

 

502set    2 wire video intercom

The 502set consists of 

  • C502 panel in chrome finished aluminium
  • S62 wall monitor with touch buttons
  • N-P17 power supply  with DIN rail mounting

The 502 set has one door panel and a screen. An additional slave screen and an additional door panel can be added. For simple wiring, the 502 set uses 2 core cables throughout, except to the slave monitor.

 

 

 

 

 

 

 

 

 

S62  screen

The wall mounted screen has a minimum of two 2 core cables wired into a 9 way terminal block. A slave monitor can be added to the installation, wired to the master screen on a 5 core cable. 

Panel Output

The panel can operate a low power 12Vdc fail secure door strike from the door open terminals. Alternatively, there is also a volt free normally open relay contact suitable for driving a door or gate control panel. This set does not include the door strike.

Cable

A single twisted pair cable connects the master screen to entry panel. For distances up to 100m, use 0.2mm core cable. For distances up to 150m, use 0.5mm core cable. 

N-P17 power pack

The set includes a power pack that can be fitted out of sight. The two core DC cable should be under 25m long. The power pack requires a 240Vac input. 

#500set

 

500set    4 wire video intercom

The 502set consists of 

  • C500 panel in chrome finished aluminium
  • S60 wall monitor with touch buttons
  • N-P17 power supply  with DIN rail mounting

The 500 set has one door panel and one screen. An additional slave screen and an additional door panel can be added. A 4 core cable is required between the master screen and the door panel. The 4 core wiring allows longer cable runs and supports an auxiliary CCTV camera in place of the additional door panel.

 

OPTIONS:

Caller picture memory screen

The S65 slave screen records a 10 second video clip of the caller when the door panel button is pressed. Flip up the screen to play back the video clips. Files are stored on a removable SD card.

CCTV monitoring

Model S100 is a large format 25cm slave screen making it suitable for monitoring CCTV cameras on the 2nd input.  An optional quad switcher allows all four pictures to be displayed at the same time.

 

 

 

 

 

 

 

 

 

S60  screen

The wall mounted screen has up to 3 four core plug-in cables. A slave screen can be added on a 6 wire link to the master. There is an ‘audio only’ intercom facility between master and slave using the 4th button. An additional call point, or a CCTV camera can be connected in.  Each screen and call point requires a power pack.

Panel Output

The panel has a volt free normally open relay contact suitable for driving a door or gate panel. The panel will not drive a fail safe lock strike directly but the contact can be used to switch a local supply. This set does not include the door strike or door strike power packs unless they are on the itemised box contents.

Cable

A four core cable connects the master screen to entry panel. Cat.5e grade cable is recommended for distances up to 200m. Longer distance can be achieved with specialist cables.

N-P14 power pack

The kit includes a power pack that can be fitted out of sight. The two core DC cable should be under 25m long. The power pack requires a 240Vac input. 


We can't find products matching the selection.